Hkoenig STM45, Instruction Manual

Page: 9 / 71

3. Press gently the metal panel of ironing brush on the clothes, move the brush up and down at such
a speed that the steam penetrates into the fibers appropriately for hot forming.
4. After ironing the main part, ironing the specific parts from up to down. When ironing the collar,
you may fold the whole collar back, hold one end of the collar by hand, move the ironing brush
horizontally and, during when, be careful of the hot steam (as shown in Picture 3).
5. When ironing the sleeves, pull the sleeves to straight and move the ironing brush along the
sleeves.
6. After ironing the front of clothes, turn the clothes over to iron its back.
Ironing Pants Line:
Take out the pants line clip, insert the metallic clasps at bottom of ironing brush into plastic slot of
the pants line clip, press down the handle to open the interface between pants line clip and ironing
brush, clasp the pants line and move the ironing brush gently up and down to make the pants line
rightly straight. The dismounting is in a reverse order.
When the steam tube bending, it happen to emit cooing sound.
Water bead may be appeared on the steam holes and the amount of
steam will decrease significantly. Lift the handle for 2-3 seconds in this
case, everything will be ok.