When the ice reach to the max storage capacity, the
indicator of this button will flash, and the machine will
stop working. What you need to do is pouring out the
ice, if the position of ice is lower than the position of ice
bin full sensor, the machine will restart automatically.
Operating Instructions
：
Note: Water reservoir and pipeline should be well cleaned
before use.
Step 1. Plug out, and clean the water reservoir by adding water,
then take plastic plug away to drain out the water from water
reservoir.
Step 2. Reinstall the plastic plug, and add appropriate clean water.
After connecting the power supply well, press and hold "SELECT"
button for 3 seconds to activate pipeline self-clean process. After
cleaning, drain out the water by taking plastic plug away.
Step 3. Open the lid and take out the ice basket to add appropriate
water into water reservoir.
Note: The water poured into water reservoir should be lower
than the water reservoir’s MAX position. When water
volume goes beyond the max, please open the bottom
water drain plug to drain the spare water out. Then
close the transparent lid.
Step 4. Select the desired ice size, the default size of machine is
large one.
Note: Please select the (S) when ambient temperature is
below 15°c.When the ambient temperature is higher
than 30°C, Large ice cube sizes are recommended.
Note: For the first three cycles, the ice may be small and
irregular in size.
Note: When the ice collecting tray is full please remove the
ice immediately, Do not allow the ice collecting tray to
overfill.
