other area or touch hot surfaces.
•
While use of an extension cord is not
recommended, if you must use one, make sure
the cord has the same or higher wattage as the
fondue (wattage is stamped on the underside of
the fondue plug). If the appliance is of the
grounde type, the extension cord should be a
grounded-type 3-wire cord. To avoid pulling,
tripping or entanglement, position the extension
cord so that it does not hang over the edge of
the counter, table or other surface area.
•
Use an electrical outlet that accommodates the
polarized plug on the fondue. On a polarized
plug, one blade of the plug is wider than the
other.
•
If the plug does not fit fully into the outlet or
extension cord, reverse the plug. If the plug still
does not fit fully, contact a qualified electrician.
Do not alter the plug.
•
Do not use an outlet or extension cord if the plug
fits loosely or if the outlet or extension cord feels
hot.
•
Keep the cord away from hot parts of the
appliance and hot surfaces during operation.
•
Do not operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been damaged or dropped. If
the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.
CAUTION
To prevent personal injuries, read and follow all
instructions and warnings.
•
Always attach heat control to fondue pot first,
then plug cord into electrical outlet. After
cooking and serving, turn heat control to “off”
and unplug from electrical outlet. Let fondue pot
cool before removing heat control.
•
Do not touch hot surfaces. Use knobs if you lift
or carry the fondue pot or cover when it is hot.
•
Moving an appliance containing hot foods,
liquids is not recommended. Extreme caution
must be used when moving a Fondue.
•
Do not place on or near a electric burner.
