• English
- 36 -
Rigging Manual 1.0
COSMO Line Array – Instructions for use
4
Insert the two quick-release pins that come with the rigging
frame to attach the fi rst M/H unit to the rigging frame's front
attachment points.
5
Insert the rigging frame's fl ap into the M/H unit's angle plate
and lift it until the fl ap meets the angle pin.
Link
0°
2°
4°
6°
8°
10°
1°
3°
5°
7°
9°
/
Note: The angle between the frame and the fi rst M/H unit
should be 0°, the same angle as used in GLL data sets.
6
Insert the fi x pin to secure the connection between the rigging
frame and the fi rst M/H unit.
Link
0°
2°
4°
6°
8°
10°
1°
3°
5°
7°
9°
/
7
Insert the quick-release pins to connect the front attachment
points of this mid/high unit to the next mid/high unit.
8
Insert the fl ap of the top M/H unit into the angle plate of the
next M/H unit. Raise the M/H unit until the fl ap meets the
angle pin (see the pictured example for a 5° angle).
Link
0°
2°
4°
6°
8°
10°
1°
3°
5°
7°
9°
/
nk
0°
2°
4°
1°
3°
n
9
Insert the fi x pin to secure the connection between these two
M/H units.
Link
0°
2°
4°
6°
8°
10°
1°
3°
5°
7°
9°
/
nk
0°
2°
4°
1°
3°
n
7 Cur
ving in Fixed Mode
