- 31 -
E
N
G
L
I
S
H
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is
plugged in, regardless of whether the unit is operating or not.
2. Press button once to start operation. Press it again to stop
operation.
3. Press button as follows. Press to set the desired fan speed.
It can be adjusted between high speed and low speed.
4. Press button to set the desired humidity level in the room,
which can be set from 40% to 80% at 5% intervals.
After a period of working,when environment humidity is lower than
the selected humidity by 2%, compressor will stop and fan stops
working 3 mintues later;When environment humidity is equel to or
higher than the selected humidity by 2%, compressor will restart
once 3-minute compressor protection time over.
5. Press button can be timer setting.
Press the button to program the time when the unit turns on and
turns off. If you want to cancel the timer programming, press the
button to adjust the time at 00, and press the button ,it will be cir-
culate from 00-01-02……23-24.It is the programmed time to switch
the machine. The programmed time will be cancelled when to
switch compressor manually each time. The programmed time
remains unchanged if the machine stops to wok due to water full
or during defrosting.
7. Press button (Optional)
When press button the Ion function and UV function will be
open and the indication lights.(Optional)
Deshumidificador DHM428_Maquetación 1 17/06/14 09:49 Página 31
