Hizero F801, User Manual

Page: 8 / 17

7
Note: Please flip to the other side of the cable and try
to connect again if the snap joint doesnʼt fit.
4 Insert the cleaning roller onto the motor (note: the maximum
open angle of the drive motor is 45°), push and fix it into the
cleaning head till the lateral button in place. 8 Insert and tighten the quick-mount screw with a coin or
screwdriver to make the upper and lower body fit together
exactly.
9 Insert the battery into battery compartment on the lower body
and tighten the screw with a coin or screwdriver.
10 Assemble the charging base, and insert the foot pads into
the holes on the bottom of the charging base. Connect the power
adapter, and put the excess power line in the special cable slot.
5 Place the lower body in upright position, open the cleaning
head cover, insert the trash container and press it into place,
then place a disposable trash container. Close the cover until
you hear a click which means the cover is closed well.
6 Push the lower body forward lightly until you hear a click
which means the appliance is well locked.
7 Take out the upper body of the appliance and remove the
body quick-mount screw first. Connect the flat cables of upper
and lower bodies.
1
2
3 4
45º
1
2
3
4
1
2
Lock
1
2
3 4
1
2
1
2
3 Preparation
1 Make sure the charging base and power adapter are well
connected, and plug the adapter in a properly grounded outlet.
3.1 Charging
2 Place the appliance on the charging base and clasp the latch
locator onto the locating stud. The charging indicator will flash in
red to indicate the appliance is charging.
3 4