Hizero F801, User Manual

Page: 5 / 17

4
Brush Roller Status Indicator
Cleaning Roller Status Indicator
Mode Button
Power Button
Battery Indicator
Mode 2 (Strong)
Mode 1 (Normal)
Tank Empty Indicator(clean water tank)
Tank Full Indicator(dirty water tank)
Charging
In Service
Flashing in red: Appliance is charging
Lighting up in blue: Appliance is fully charged
Lighting up in red: Low battery. The appliance can only operate for about 3 minutes and will automatically
switch-off once the battery runs out.
Lighting up in blue: Battery capacity is good.
Flashing: A. Dirty water tank is full.
B. Dirty water sensor is covered by dirt.
Lighting up continuously:
A. Dirty water tank may not be placed properly.
B. The appliance is not functioning properly, please contact after-sales service.
Flashing: A. Cleaning head cover is not well closed.
B. Maybe the brush roller is jammed by outer objects.
Lighting up continuously: The appliance is not functioning properly. Please contact after-sales service.
Flashing: Clean water tank is short of water. The appliance will stop working and automatically switch-off after 30 seconds.
Lighting up continuously: The appliance is not functioning properly. Please contact after-sales service.
Flashing: Maybe the cleaning roller is jammed by outer objects.
Lighting up continuously: Replace the cleaning roller with a new one since the designed life of it has met, then keep
pressing the mode button till the indicator goes out.
Atmosphere lamp shows in blue: The appliance is in normal operation.
Atmosphere lamp shows in red: The appliance is not functioning properly. Please check the indications on the display
panel.
Mode 1: Normal mode, meaning less water consumption for self-cleaning. A full tank of clean water can be used for
approximately 10 minutes.
Mode 2: Strong mode, meaning more water consumption for self-cleaning. A full tank of clean water can be used for
approximately 5 minutes.