21
ENGLISH
TEMP Button
: Push this button to decrease the indoor temperature setting.
TEMP Button
: Push this button to increase the indoor temperature setting .
MODE Selection Button
: Each time the button is pressed, the operation mode is shifted in the direction
of the arrow:
NOTE
: COOL only model has no HEAT feature. operation mode is shifted in the direction of the
arrow:
SWING Button
: Push this switch button to activate auto swing feature of the horizontal louver. Push it
again to stop.
RESET Button
: When you press the recessed RESET button, all current settings are cancelled and the
control will return to the initial settings.
AIR DIRECTION Button
: Press this button to change the swing angle of the louver. The swing angle of
the louver is 6 for each press. When the louver swing at a certain angle which would affect the cooling
and heating effect of the air conditioner, it would automatically change the swing direction. No symbol will
appear in the display area when press this button. (Not applicable to units without this function).
LED DISPLAY Button
: Press this button to clear the digit display in the air conditioner, press it again to
activate it (Not available for the units without LED display window).
FAN SPEED Button
: Used to select the Fan Speed in four steps- AUTO, LOW, MED or HIGH. Each time
the button is pressed, the fan speed mode is shifted.
ON/OFF Button
: Push this button to start operation, push the button again to stop operation.
TIMER ON Button
: Press this button to initiate the auto-on time sequence. Each press will increase
the auto-timed setting in 30 minutes increments. When the setting time displays 10:00, each press will
increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust
the auto-on time to 0:00.
11
SLEEP Button
: Press this button to go into the Energy-Saving operation mode. Press it again to cancel.
This function is only can be used on COOL, HEAT and AUTO mode and maintain the most comfortable
temperature for you.
NOTE
: While the unit is running under SLEEP operation mode, it would be cancelled if you press the
other button.
12
TIMER OFF Button
: Press this button to initiate the auto-off time sequence. Each press will increase
the auto-timed setting in 30 minutes increments. When the setting time displays 10:00, each press will
increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-off time to 0:00
13
LOCK Button
: When you press the recessed LOCK button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK. Press again to cancel the
LOCK mode.
14
TURBO Button
: Push this button to activate/cancel the Turbo function which enables the unit to reach the
preset temperature in the shortest time. On cooling mode, the unit will blow strong cooling air with super
high fan speed. On heating mode (applicable to the unit adopts PTC only), the PTC will bring fast heating
operation.
15
CLEAN AIR Button (on some models)
: When push this button, the Ionizer or Plasma Dust
Collector(depending on models) is energized and will help to remove pollen and impurities from the air.
AUTO
COOL
DRY
HEAT
FAN
