Hiyasu ASE 129U11iM, Operation Manual

Page: 52 / 58

ENGLISH
50
Table of mode conflicting in operation:
Cleaning
Cleaning the indoor unit
Before you clean the air conditioner, be sure to turn off the main power supply.
1
Use a dry cloth to wipe the indoor unit and remote controller.
2
A cloth dampened with cold water may be used on the indoor unit if it is too dirty.
3
Remove the front panel of indoor unit, clean it with water and wipe it up with a dry cloth.
CARE AND MAINTENANCE
COOL HEAT DEHUMIDIFY FAN AUTO
COOL ENABLE DISABLE ENABLE ENABLE
HEAT DISABLE ENABLE DISABLE DISABLE
DEHUMIDIFY ENABLE DISABLE ENABLE ENABLE
FAN ENABLE DISABLE ENABLE ENABLE
MANDATORY COOL RUN ON THE SAME MODE AS THE PRIMARY UNIT
AUTO COOL ENABLE DESACTIVAR ENABLE ENABLE
AUTO HEAT
DISABLE ENABLE DISABLE DISABLE
AUTO FAN
ENABLE DESACTIVAR ENABLE ENABLE
RUN ON THE
SAME MODE AS
THE PRIMARY
UNIT
UNIT B
UNIT A
Caution
• Do not use a chemically-treated dusted for wiping or leave such materials on the unit for long.
• Do not use benzine, thinner, polishing powder, or similar solvents for clean.
06Manual 24D ENG 2/1/07 13:34 Página 50