30
hivolt.de
GmbH & Co. KG
Oehleckerring
40
∙
D-22419
Hamburg
∙
Germany
∙
+49 40 537122-0
∙
+49 40 537122-99
∙
∙
www.hivolt.de
9.
Make sure that "Run after programming" is checked. This will reset the HA61 after
flashing
10.
click "Start programming"
11.
After a while the dialog boxes "file download complete","start operation achieved
successfully" and "warning: connection to device is lost" will appear; the COM port is
now disconnected from the STM32CubeProgrammer application
12.
the HA61 will automatically restart
13.
on the terminal program, re-connect to the appropriate COM port
14.
enter command $ RID to check the connection and see the new software version
number
15.
start the update of the HV generator software by entering command $ HVF
16.
the flashing process will show up on the terminal; end message: " # resetting HV "
17.
enter command $ RID to check the new software version number of the HV generator
18.
the software update process is finished
© hivolt.de GmbH&Co. KG, Hamburg, Germany
As of 07/2020
Document History:
Version Date
Name Changes
1.0 2020-06-21
WM
Created
1.0 2020-06-23
JS
Commands
RVM,ROM,RCM
Command RAT corrected
1.0 2020-06-25
WM
Command
SHS
1.0 2020-07-08
WM
Div.
commands; S/R-Limit: 30V/
μ
s max; 9.4 Software Updates
