HD-SDI DVR HF-406 / 812 / 1612
53
7.2 Network
This is menu for configuring network
- Type
Configure type of Network (Ethernet/xDSL).
If connected to cable modem or Lan directly to DVR,
configure by “Ethernet”.
If DVR connects to xDSL- one of PPPoE type, configure
xDSL.
But if it is not type of PPPoE, configure ‘Ethernet’.
1) Ethernet
- DHCP
With DHCP (Dynamic Host Configuration Protocol), all hosts connected to Lan can get Public IP address
temporary.
If LAN has DHCP server and it is active, DHCP server allocate IP address to DVR.
Mostly middle and large network use DHCP server in LAN, but in case of small network, NAT(Network
Address Translation) of HUB is general.
- IP Address
IP Address is for the connection between DVR and Control Center and also for web connection from
Webviewer. (But, Net Mask, Gateway should be configured.)
- Net Mask
Net Mask makes range of IP address available. It should be received from network administrator.
- Gateway
Gateway is necessary to communicate IP, it should be received from network administrator.
- DNS Server
DNS1 is mandatory item to regist and use WRS and it should be asked to network administrator.
- UPnP Port Forwarding
When using Internet Sharing device supporting UPnP, this function enable all connected DVR to do Port
forwarding and they can be connected to Internet with IP address of Internet Sharing device.
① Configure two DVRs with DHCP On
② Please, check if DVRs which are connected to Internet Sharing Device are allocated with official IP
MENU
NETWORK
NETWORK
MENU
NETWORK
Ethernet
