HITWAY BK6, Quick Operation Manual

Page: 10 / 60

-7-
9. Pedal installation method
10. Power-on operation steps
The "L" marked on the pedal shaft is the left pedal. Turn the pedal shaft counterclockwise and screw it
into the left crank, and then use a No. 15 open-end wrench to turn it counterclockwise to tighten.
The “R” marked on the pedal shaft is the right pedal. Rotate the pedal shaft clockwise and screw it into
the right crank, and then use a No. 15 open-end wrench to turn it clockwise to tighten.
①
②
1. Insert the key into the key hole at "1" in the
picture, turn the key from the "OFF" position to the
right and screw it to the "ON" position.
2. Press the switch on the panel at "2" in the
picture to start the machine.