14
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your
requirements. These cameras accept both C-and CS-mount type lens.
<INSTALLING AUTO IRIS LENS>
1.
Remove the cover from the iris lens plug supplied, and solder the lens cable to the
plug as shown below.
2. Remove the protective cap, and attach the lens to the camera by turning clockwise.
<Notes >
● For using main functions it is recommended to use Auto Iris Lens with DC
type.
● If the lens is marked with fingerprints other marks, the image quality might
be poor.
● It is recommended to use a high quality lens to improve the image quality
under low illumination.
● Video type:
Pin 1 --- Red (Power source)
Pin 2 --- N.C
Pin 3 --- White (Video signal)
Pin 4 --- Black (GND)
● DC type:
Pin 1 --- Damping-
Pin 2 ---
Pin 3 --- Drive+
Pin 4 --- Drive-
Pin 3
Pin 1
Rib
Pin 4
Pin 2
Connector
Cover
Heat
Shrinkable
Tubes
Automatic
Iris Lens
Iris Control
Cable
Connector
Summary of Contents for HCB-J5FD
Page 2: ......
Page 17: ...50302575B...
