Hitron CODA-4 8 Series User Manual Download Page 55

Page: 55 / 150

Hitron CODA-4x8x User’s Guide

Upstream Overview

NOTE:

The upstream signal is the signal transmitted from the CODA-4x8x.

Port ID

This displays the ID number of the upstream

connection’s port.

Frequency (Hz)

This displays the actual frequency in Hertz (Hz) of each

upstream data channel to which the CODA-4x8x is

connected.

Modulation

This displays the type of modulation that each upstream

channel uses.

Signal Strength

(dBmV)

This displays the power of the signal of each upstream

data channel to which the CODA-4x8x is connected, in

dBmV (decibels above/below 1 millivolt).

Channel ID

This displays the ID number of each channel on which

the upstream signal is transmitted.

Bandwidth

This displays the maximum available bandwidth on the

relevant channel.

OFDM/OFDMA Overview

NOTE:

This section of the GUI provides data about upstream channels.

Channel Index

This displays the index number of the OFDM/OFDMA

channel.

State

This displays whether or not the relevant channel is

currently in use, or not.



ENABLED

displays when the channel is in use.



DISABLED

displays when the channel is not in

use.

Lin Digital Att.

This displays the digital attenuation, or signal loss, of

the transmission medium on which the channel’s signal

is carried, in decibels (dB).

Digital Att.

This displays the measured digital attenuation of the

channel’s signal, in decibels (dB). Digital attenuation is

affected by the frequency of the signal; a higher-

frequency signal will suffer more attenuation than a

lower-frequency signal.

Table 10:

The Status: DOCSIS WAN Screen (continued)

Summary of Contents for CODA-4 8 Series






















































































































































Search results

Summary of Contents for CODA-4 8 Series

Reviews:

Brands by name

Popular brands

Hitron CODA-4 8 Series, User Manual

Search results

Summary of Contents for CODA-4 8 Series

Reviews:

Brands by name

Popular brands