BASIC
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
64
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
64
Hitron CGNM-2250 User’s Guide
4.5
The Port Triggering Screen
Use this screen to configure port triggering. You can turn port triggering on or off and
configure new and existing port triggering rules.
Click
Basic
>
Port Triggering
. The following screen displays.
Figure 24:
The Basic: Port Triggering Screen
The following table describes the labels in this screen.
Table 20:
The Basic: Port Triggering Screen
All Port Triggering Rules
Use this field to turn all port triggering rules on or off.
Select
Enabled
to turn all port triggering rules on.
Select
Disabled
to turn all port triggering rules off.
Port Triggering Rules
Application Name
This displays the arbitrary name you assigned to the
rule when you created it.
Trigger
This displays the range of outgoing ports. When the
CGNM-2250 detects activity (outgoing traffic) on these
ports from computers on the LAN, it automatically opens
the
Target
ports.
Target
This displays the range of triggered ports. These ports
are opened automatically when the CGNM-2250 detects
activity on the
Trigger
ports from computers on the
LAN.
Protocol
This displays the protocol of the port triggering rule
(
TCP
,
UDP
or
Both
).
Timeout (ms)
This displays the time (in milliseconds) after the CGNM-
2250 opens the
Target
ports that it should close them.
