HITROL HCC-96RF-C Series Instruction Manual Download Page 2

Page: 2 / 30

HCC-96RF-C(S) Series

HITROL CO.,LTD.

You shall be careful where CAUTION is

marked to carry out the work.

You shall be aware of where NOTICE is

marked to carry out the work.

You shall be well-informed of the contents

where WARNING is marked before carrying

out the work.

Table of Contents

Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3

Characteristics · · · · · · · · · · · · · · · · · · · · · · · · · · · 3

Operating Principle · · · · · · · · · · · · · · · · · · · · · 3

Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · 4

Product Composition · · · · · · · · · · · · · · · · · · · · · 5

Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6

Precautions for Installation · · · · · · · · · · · · · · · · · 6

Precautions for Attachment · · · · · · · · · · · · · · · · 7

Wiring · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7

Precautions for Use · · · · · · · · · · · · · · · · · · · · · · 7

Precautions for Removal · · · · · · · · · · · · · · · · · · · 7

Precautions for Grounding · · · · · · · · · · · · · · · · · 7

Maintenance · · · · · · · · · · · · · · · · · · · · · · · · · 8

Failure Check · · · · · · · · · · · · · · · · · · · · · · 8

Safety and Environment · · · · · · · · · · · · · · · · · · 8

Marking · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9

Warranty and Contact · · · · · · · · · · · · · · · · · · · · · 9

APPENDIX

APPENDIX Q · · · · · · · · · HCC-96RF-C Setting Guide

APPENDIX S · · · · · · · · · HCC-96RF-S Setting Guide

APPENDIX H · · · Serial USB Terminal Install Guide

Summary of Contents for HCC-96RF-C Series































Search results

Summary of Contents for HCC-96RF-C Series

Reviews:

HITROL HCC-96RF-C Series, Instruction Manual, Page: 2 / 30

Search results

Summary of Contents for HCC-96RF-C Series

Reviews: