4
IOM_CCHIBA-CSTIBA_301_207925_170706_EN
CCHIBA/CSTIBA
SPLIT HORIZONTAL INVERTER UNITS
PACKAGED AIR-AIR
INTRODUCTION
Purpose of the Manual
This manual and the instruction documents of refrigeration lines, wiring diagrams and any other attached
documents, have been written to allow a correct installation, set up and maintenance of the unit.
Therefore it is essential to read the instructions with due attention. Verify all the necessary information for
the correct installation of the system is included in the manuals supplied with this unit and / or the rest of
the indoor units, accessories, etc. Otherwise, the manufacturer declines any responsibility for any
damage to persons or things, as a result of improper use of the unit and/or failure to observe these
instructions.
Preservation Manual
This manual and the electric diagram of the unit must be retained and remain available to the operator for any further
consultation.
Updating the Data
The continuous improvement in design and performance to which we are committed gives us the right to modify the
specifications of our products without prior notice.
Electrical Network
Check that electrical network features are in accordance to data shown in the data nameplate of the unit.
Local Safety Regulations
Observe and analyze all possible causes of accidents that may arise in the place or places of installation of the units,
check means and tools to use, etc. It is not possible to anticipate each and every one of the potential circumstances of
danger in this manual. Respect the local security standards during installation.
Principles of Security on Installation
The unit is designed and built in a way that does not pose a risk to the health and safety of people. Appropriate project
solutions have been adopted to eliminate the possible causes of risk in the installation.
Packaging and Replacement of Equipment
The packaging material (plastic bags, insulating materials, nails, etc.) is a potential source of danger and
should be kept out of the reach of children and properly recycled according to local safety regulations.
This product should not be mixed with household waste at the end of its life. Due to the refrigerant, oil
and other components contained in this product, it must be dismantled by professional installers in
accordance with current regulations.
Use
The unit will be used only for the reason has been conceived. Any other use does not imply any kind of compromise or
link for the manufacturer.
Incorrect Operation
In case of breakdowns or operation faults, turn off unit.
Periodic Inspections and Maintenance
Carry out periodic inspections to detect possible damaged or broken pieces. If they are not repaired it
could result in damage to people or stuff. Before executing any maintenance operation, cut off the unit
power supply.
All operations must be carried out in accordance with local safety regulations.
