6
IOM_ACVIBA HE_35ia80i_207910_190501_EN
ACVIBA HE
AIR-AIR PACKAGED UNITS
COMPACT VERTICAL INVERTER
INTRODUCTION
Utilization
The unit will be used only for the purpose it has been designed for. Any other use does not imply any kind of liability or
responsibility from the manufacturer.
Incorrect Operation
In case of breakdowns or operation faults, turn the unit off.
Periodic Inspections and Maintenance
Carry out periodic inspections to detect possible damaged or broken parts. If these parts are not repaired
it could cause people injuries or material damages. Cut off the power supply to the unit before carrying out
any maintenance operation.
Make sure to leave the maintenance areas open. If these areas have to be necessarily invaded by the
construction of air supply and/or lateral return ducts, verify that the design of the ducts allows the access
to the fans and the change of the filters or that these are accessible from the other side.
All operations should be carried out in accordance with local safety regulations.
Repairing Operations
The reparation operations shall always be carried out by trained personal exclusively and authorized by
the manufacturer using original spare parts. The safety devices of the unit could be damaged in case of
non-compliance with these warnings.
Modifications
The manufacturer will not respond possible warranty claims and to possible damages of the unit in case of electrical and/or
mechanical modifications. The unauthorized manipulation, reparation or modification of the unit will automatically
invalidate the warranty.
Refrigerant
This product is hermetically sealed and contains R-410A which is a HFC fluorinated greenhouse gas.
REGULATIONS AND CERTIFICATIONS
ISO 9001 CERTIFICATION:
HIPLUS AIRE ACONDICIONADO S.L., by endeavouring to always gain the maximum
satisfaction from their customers, obtained the ISO 9001: Quality System for its production activity. That result shows our
continuous determination to improve quality and the reliability of all our products. Our commercial activities, design, raw
materials, production processes and after-sales service represent the means to reach our goal.
CE MARKING
: Our products are CE marked according to the essential requirements of the applicable EC directives and
their last modifications and comply with the national legislation of each country.
