Introduction
12V
Instruction manual
EN
Thank you for your choice of the HiTEC multicharger X4 MICRO SE. This unit is simple to use but it´s
operation does require some knowledge on the part of the user. Please read this entire operating manual
completely and attentively before using this product, as it covers a wide range of information on operating
and safety.
The multicharger X4 MICRO SE employs the circuit that features four totally independent but identical power
outputs which are powered 5W each. It is designed for charging single cell LiPo. Insert the battery lead to
the right connector in each port, the charger will charge 4 batteries at the same time. And the charging
current can be adjusted from 0.05 to 1.2A by dial, the charging capacity and cell voltage can be displayed in
the digital LED indicator.
# 1-00689
Errors and omissions excepted © MULTIPLEX
Specifikation
AC / DC Input
100-240V / 11-15V
Charge circuit power
4x 5,22W ± 10%
Charge current range
0.05 - 1.2A ± 10%
Battery type
4x 1 Zelle LiPo / LiHV
Battery connector type
Micro / JST / MX / mCPX
Working temperature
0-50°C
Net weight
245 g
Dimension
130x94x50mm
JST
mCPX
Micro
MX
4-Digital LED
Indicator
Charging Status
LED Indicator
Rotary Dial
for Setting
Charging Current
Start/Stop Button
AC Input Power Port
100-240V
DC Input
Power Jack
11-15V
When using AC power source
1. Insert the AC power cord into the charger.
2. Insert the AC power cord into a wall socket (100-240V).
3. When charger is powered on, 4 status LEDs will blink
once with one beep and all digital LED indicators will
display 8888. After that, 4 LEDs will extinguish and all
digital Displays will show the charging current which
indicates the charger is ready to charge.
Caution:
Each charging port can only charge one kind
of battery at the same time.
When using 12V lead acid battery
Using DC cable attaching to car battery
When there is an error, the LED will blink red twice per second with an audible sound.
After ten times of blinking, the red LED will stay on and the digital LED will display the error code.
· Four independent ports can be used at the same time
· Four different kinds of battery connectors at each port
· Four independent functioning charging circuits
· Four independent digital LED Displays
· LED and audible sound indicate charging status
· Adjustable charging current from 0.05 to 1.2A
· AC/DC Dual Power Input
· Maximum protection: short circuit protection; over current protection; battery reverse polarity protection
and DC input voltage protection
Features
Charging
Error messages
Error
Error Message
-11-
Dead cell or the voltage of the cell is either too high or too low for safe charging.
-22-
The battery polarity is connected incorrectly.
-33-
The battery connection is wrong.
-44-
Short circuit or over current in the battery.
-55-
The DC input voltage is either too high or too low.
12V
