12
13
Battery & Power Supply Connections
TO AVOID SHORT CIRCUITS, ALWAYS CONNECT THE CHARGE LEADS
TO THE CHARGER FIRST, AND THEN TO THE BATTERY. REVERSE THE
SEQUENCE WHEN DISCONNECTING THE PACK.
Warning
Battery Connection With Balance Adaptor.
2S
3S
4S
5S
6S
1
2
3
4
5
6
BATTERY
DC 11-18V
BALANCE
SOCKET
BALANCE ADAPTOR
X1 CHARGER
BALANCE
LEAD
1.) Connecting to Power Source:
It is an AC charger only. Please insert the AC power cord to the wall socket (100-
240V) directly to power it on.
2.) Connecting the Battery:
Important!!! Before connecting a battery, it is absolutely essential to check one
last time that you have set the parameters correctly. If the settings are incorrect,
the battery may be damaged and could even burst into fl ames or explode. To
avoid short circuits between the banana plugs, always connect the charge leads
to the charger fi rst and only then to the battery. Reverse the sequence when
disconnecting the pack.
3.) Balance Socket:
In default setting, for safety issue, it requests to use balance charging wire with
balance board to charge Lithium batteries in all modes. If the charging
battery has no balance wire, please disable this function in system setting
program as following:
BATT PROG / STOP Button:
Stop a function in-progress or to go back to previous step/screen.
DEC Button:
Scroll through menus or decrease the parameter value.
INC Button:
Scroll through the menus or increase the parameter value.
ENTER / START Button:
Enter parameters or store parameters on-screen. Start the charge/discharge
process.
When changing a parameter value in the program, press the START/ENTER
button to make it blink, then change the value by pressing the DEC and INC
button. The value will be stored by repressing the START/ENTER button. If there
is a second parameter to edit on the same screen, it will begin blinking after you
confi rm the fi rst parameter value.
When you fi rst power the charger on it displays the last processes used. From
here you can change the battery type or press enter to change the charge/
discharge process, charge/discharge current rate and/or battery cell count. If
you are charging a battery identical to the last one used and want to perform
the same process then simply press the start to begin that process.
Input Functions