58
59
Flight Condition (F.Cond)
Flash 8 is capable to program 5 different flight conditions.
This powerful feature lets you define customized trim values and mix settings for different phase of flight.
1. From the model menu, rotate the jog dial to highlight
“F.COND” and press the jog dial once to enter the flight
conditions menu.
2. Scroll to the flight condition to be configured and press the
jog dial to confirm your selection.
The flight conditions for fixed wing aircraft are:
ACRO & GLID
1. Normal
2. COND-2
3. COND-3
4. COND-4
5. COND-5
The following features support flight condition programming in ACRO or GLID mode:
Aileron > Rudder Mix
Elevator > Camber Mix
Camber Mix (GLID only)
Gyro
Aileron differential
FLAP Control
Landing ( ACRO Only )
Program Mix
Ailevator
V-Tail
Elevon
3. Press the jog dial again to activate the switch selection menu
(not applicable in “Normal” flight condition).
4. Scroll to select the switch that you will use to activate this flight condition and press the jog dial to
confirm your selection.
a. If “NULL” is selected, the flight condition will be inactive.
b. If you selected a switch, the switch position menu will appear.
- Scroll to highlight the switch position that you will use to
enable the flight condition. Press the jog dial to confirm your
selection.
- Scroll to select the “ON” position and press the jog dial to
confirm your selection. If you toggle the selected switch, the
field in the top right corner of the screen will indicate which
flight condition is active
F. Cond cont.
If more than one flight condition is concurrently enabled, the condition with the highest
number (per the table shown above) will be active. The field just below the model icon on the
Home screen indicates the active flight condition.
5. Scroll to highlight the “SPEED” field and press the jog dial to
activate the menu.
6. Scroll to define the amount of time (0.0 to 10.0 seconds) to
transition the settings when this flight condition is enabled.
Press the jog dial to confirm your selection. This feature can
be utilized to prevent sudden control surface movements
when switching between flight conditions.
- Press the back button twice to return to the flight conditions menu.
7. Press the back button to return to the flight conditions menu and repeat steps 2-6 to define further
flight conditions.
8. Press the back button twice to return to the model function menu.
Tip
Tip
Tip
Flash 8 offers two customizable timers that can be triggered by switches or the throttle position.
Downward counting timers enables a safe flight of the model by making sure that you land before
running out of fuel or battery power. Upward counting timer measures the flight time duration of your
glider. In addition, there is an integrated timer for each model memory that automatically records the
total duration of the flight time of each model. All timers are displayed on the home screen.
Timer
To configure a timer:
1. From the model menu, scroll to highlight “TIMER” and press
the jog dial once to enter the timer menu.
You can also enter the timer menu directly from the home screen. Scroll to highlight a timer on
the screen and press the jog dial.
Note
2. Scroll to highlight “INH” under TIMER-1 and press the jog dial
to activate the menu.
3. Scroll to select “ACT” (active) and press the jog dial to confirm
your selection.
Summary of Contents for Flash 8
Page 1: ......
Page 2: ...8 Channel 2 4 GHz Aircraft Computer Radio System...
