E) Servo Reversing
- After entering the Main Edit mode press the "FUNC" button to scroll to the Servo Reversing menu.
- Steering will show first.
- Press the "SEL" button to move the curser to select ST for steering,
THRO for throttle or AUX for the third auxiliary channel.
- Once the proper channel is selected, press the "DATA" + and - buttons at the
same time to reverse the servo.
- If properly done you will hear one "beep" and the display will change from
"NOR" (Normal) to "REV" (Reverse) or vice versa.
- Press the "FUNC" button to scroll to the next menu, or press the "FUNC" button for
three seconds to return to the operation screen.
D) Exponential
- Negative steering exponential will make the vehicle less sensitive to small inputs and
Positive expo will make the vehicle more sensitive. Typically you will only use negative expo for
steering but you should experiment with this setting to see what suits your driving style the best.
-30% is a good place to start.
- Use negative expo for the throttle to broaden the power band and positive expo to increase the
"punch". Typically you will use negative expo with a modified electric vehicle, nitro vehicle,
or in situation where the traction is low and positive with a stock electric or when the traction is high.
- After entering the Programming mode press the "FUNC" button to scroll to the Exponential menu.
- Steering will show first.
- Press the "DATA" + button for positive Expo or the - button for negative expo.
- To adjust Throttle Exponential, press the "SEL" button once.
- Press the "DATA" + button for positive Expo or the - button for negative expo.
- Note: Push the "DATA" + & - buttons at the same time to reset to factory default.
- Press the "FUNC" button to scroll to the next menu, or press the "FUNC" button for three seconds to
return to the operation screen.
AUX
ST
EXP
EXP
ST
TH
TH
