46
47
Trim Videos
When viewing the downloaded files on the mobile device, you
can click the icon "
" at the bottom of the screen to access
the video trimming interface shown in the figure below:
Save and share
video file
End frame
Start frame
Current frame
Storyboard
Narrow the frame
Expand the frame
Play icon
Click the icon to save and share the edited video file. This
function allows you to take a clip out of the video to generate
another video by changing the starting frame and ending
frame.
To accomplish this, use 1 of the 2 methods detailed below:
Method One: change the starting frame and ending frame by
dragging the time frame panel (click the Play key for previewing
until the best location is reached).
Method Two: click "
" to set the current frame as the
starting frame, drag the time frame panel to change the current
frame, and then click "
" ]” again to set the current frame
as the ending frame.
Change Wi-Fi Connection Name and Password
1. To change the Wi-Fi connection name:
Connect your camera (with TF card installed) to the
computer and turn your camera on. On the computer,
double click "My Computer" to find and access the
removable disk, and then open the"
" WiFi.conf file in
the folder "MISC." Find "AP_SSID=AEE Magicam." Change
the content following the equal sign "=" to your desired
name and save it.
2. To change the Wi-Fi connection password:
Connect your camera (with TF card installed) to the
computer and turn your camera on. On the computer,
double click the icon "My Computer" to find and access
the removable disk, and then open the "
" WiFi.conf
file in the folder "MISC." Find "AP_PASSWD=AEE12345."
Change the content following the equal sign "=" to your
desired password (containing 8 digits) and save it. (Please
note, only 8-digit passwords are supported.)
In case of synchronous operation of the camera and the
Wi-Fi based remote control, the MD10 will give priority to
the operation command from the camera.
Above images for reference only, subject to app availability.