manualshive.com logo in svg

Hitachi WH 9DM2, Technical Data And Service Manual, Page: 33 / 47

Share
Download
Hitachi WH 9DM2 Technical Data And Service Manual Download Page 33

--- 30 ---

Fig. 10

Align the protrusions of housing (A) to the concave portions
(for locking) of Magnet (D) 

[26] <23>

 and the Magnet Spacer 

[27]

(Model WH 9DM2 only).

Housing (A)

(e) Mount the DC-Speed Control Switch 

[37] <33>

 to housing (A) so that the protrusion of the forward/reverse

 lever at the top of the switch is inserted into the hole of Pushing Button (A) 

[38] <34>

.  Apply silicone

 grease (KS609, Shin-Etsu Chemical Co., Ltd.) to the contacting surfaces of the FET of the DC-Speed

 Control Switch 

[37] <33>

 and Dust Guard Fin (A) 

[28] <24>

 then mount them to housing (A).

(Note) The temperature of the FET can be high if the silicone grease is not applied.  Make sure that the

three internal wires from the FET are bent as shown in Fig. 11 and passed above the DC-Speed

Control Switch 

[37] <33>

 to keep from contact with Pushing Button (A) 

[38] <34>

 (see Fig. 11).

(2) Apply silicone rubber (ThreeBond 1211) to housing (A) and Inner Cover (A) 

[23] <20>

 as shown in Fig. 11.

Mount housing (B) and secure them with seven Tapping Screws (W/Flange) D4 x 20 (Black) 

[32] <28>

.  Wipe

the silicone rubber coming out of the housing with a cloth.  Insert Sleeve (A) 

[45] <41>

 into the Strap 

[44]

<40>

 and tighten the Machine Screw (W/Washers) M4 x 25 

[46] <42>

.

Summary of Contents for WH 9DM2
















































Reviews:

No comments