manualshive.com logo in svg

Hitachi VT-MX935E, Instruction Manual, Page: 63 / 76

Share
Download
Hitachi VT-MX935E Instruction Manual Download Page 63

63

SUBSIDIAR

Y

INFORMA

TION

MAINTENANCE

Touch to the video head

Cylinder

Cleaning roller

(Special material)

Tape guide

Tape

Video head

1. To maintain the optimum performance of this

VCR, regular periodic maintenance is required.
Your dealer will advise you further.

2. Maintenance and adjustments may not be

carried out by the user.  In all cases of difficulty
or doubt, consult your dealer.

3. Head cleaning

Dirt accumulated on the video heads after a
period of time may cause the playback picture
to become blurred or part of the video
information to be lost.  This does not mean that
the recorded programme has been erased but
head cleaning is required.

Since this VCR uses an auto head cleaning system,
dirt does not often adhere to the heads.
• If dirt cannot still be removed, consult your

dealer.

Auto Head Cleaning System

This system cleans the video heads automatically when a cassette is inserted and ejected or the VCR
is turned on or off while a cassette is in the VCR, to prevent dirt from accumulating on the heads.

Note:

Mechanical sound is heard during head cleaning.

Summary of Contents for VT-MX935E













































































Reviews:

No comments