manualshive.com logo in svg

Hitachi VT-FX960E, Instruction Manual

Share
Download
Hitachi VT-FX960E Instruction Manual Download Page 64

64

Sometimes problems can be solved easily by checking a few basic things.
Check below before you call for help or take your unit to your dealer.

No power

• Check to see if the VCR is plugged into an AC mains socket.

Will not record

• No cassette in the VCR.
• Safety tab removed from cassette.

(In this case, the cassette will be ejected.)

Will not playback

• No cassette in the VCR.
• For playback, TV must be tuned to the video programme number.
• Set the TV to the video input mode when the VCR and TV are connected via a Scart

connector (see your TV manual).

• Press the VCR/TV button on the remote handset to display the 

indicator on the

VCR display when the VCR and TV are connected via a Scart connector.

Snowy/Noisy picture

• Make sure the TV is fine tuned.
• Head cleaning may be required.  See “MAINTENANCE”.
• Some snow or streaks are normal during visual search, still and slow playback.

Will not make timer recordings

• The VCR should be in the standby mode to activate timer recording.
• Programmes entered incorrectly.
• Clock was not set correctly.
• Programme exceeded cassette length.
• No cassette or cassette’s safety tab removed.

Cannot store tape data in memory

• Check that “TAPE NAVI 

✓

” is specified in the TAPE NAVI MENU.  If “—” is specified,

switch it to “

✓

”.

• Check the time at which the recording was made.  Data is not stored in memory when

the recording time is less than 5 minutes.

• The tape data memory is full.  Delete unnecessary tape data.

Cannot locate the beginning of a programme

• You cannot search for a programme you want to view from the tape recorded on

another VCR.

• Rewind the tape to its start, then press NAVI button.

Clock shows — — : — —

• Power interrupted.

Poor/No picture in normal TV viewing

• Carefully check aerial connection.

Indication of the VCR display appears abnormal/No button can be engaged

• Push the reset switch using a toothpick, etc.

The display will be reset.  Then set the information again.

Auto Install does not function.

• You have failed to engage Auto Install function (See page 10). 

Proceed with pre-tuning (See page 12).

400x DRIVE

EJECT

PROG

VIDEO IN

L (MONO)–AUDIO IN-R

VIDEO LINK

REC

STOP

TAPE

NAVIGATION

PLAY/STILL

PROBLEM GUIDE

Summary of Contents for VT-FX960E

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands