background image

IMPORTANT SAFEGUARDS 

- 5 - 

one blade wider than the other). This plug will fit into the power outlet only one way.  This is a safety feature. If 
you are unable to insert the plug fully into the outlet, try reversing the plug.  If the plug should still fail to fit, contact 
your electrician to replace your obsolete outlet.  To prevent electric shock do not use this polarized plug with an 
extension cord, receptacle or other outlet unless the blades can be fully inserted without blade exposure.  If you 
need an extension, use a polarized cord. 

 

 

 

 

 

 

5  Power Sources

 -- This video product should be operated only from the type of power source indicated on the 

marking label.  If you are not sure of the type of power supply to your home, consult your video dealer or local 
power company.  For video products intended to operate from battery power, or other sources, refer to the 
operating instructions. 

6  Overloading

 -- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric 

shock.  Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or 
cracked wire insulation and broken plugs.  They may result in a shock or fire hazard.  Periodically examine the 
cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 

 

 

 

 

 

 

7  Power Cord Protection

 -- Power supply cords should be routed so that they are not likely to be walked on or 

pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience 
receptacles, and the point where they exit from the appliance. 

8  Ventilation

 -- Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the 

video product and to protect it from overheating.  These openings must not be blocked or covered.  The openings 
should never be blocked by placing the video product on a bed, sofa, rug or other similar surface.  This video 
product should never be placed near or over a radiator or heat register.  This video product should not be placed 
in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product 
manufacturer's instructions have been followed. 

 

 

 

 

 

 

9  Attachments

 -- Do not use attachments unless recommended by the video product manufacturer as they may 

cause hazards. 

Caution:

 Maintain electrical safety.  Powerline operated equipment or accessories connected to this unit should 

bear the UL listing mark or CSA certification mark on the accessory itself and should not have been modified so 
as to defeat the safety features.  This will help avoid any potential hazard from electric shock or fire.  If in doubt, 
contact qualified service personnel. 

10  Water and Moisture

 -- Do not use this video product near water - for example, near a bath tub, wash bowl, 

kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 

11  Accessories

 -- Do not place this video product on an unstable card, stand, tripod, bracket or table.  The video 

product may fall, causing serious injury to a child or adult, and serious damage to the appliance.  Use only with a 
cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the video product.  Any 
mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory 
recommended by the manufacturer. 

11A

  An appliance and cart combination should be moved with care.  Quick stops, excessive force, and uneven 

surfaces may cause the appliance and cart combination to overturn. 

Summary of Contents for VT-FX6410A


















































































Reviews: