Hitachi VM-E310A Instruction Manual Download | Manualshive

Page: 5 / 66

background image

For Your Safety

5

the limits of current technology (only for VM-E310A).

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

Note:

This equipment has been tested and found to comply with the limits of Class B digital

device, pursuant of Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

Caution to the user:

Changes or modifications not expressly approved by the manufacture

could void the user's authority to operate the equipment.

"Note to CATV system installer:

This reminder is provided to call the CATV system

installer's attention to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical".

Notes:

This unit uses 8mm video format cassettes.
It records and plays back in the SP mode (14.3 mm/sec).
It cannot record and play back in the LP mode (7.2 mm/sec).

«
...
3
4
5
6
7
...
»

Summary of Contents for VM-E310A



































































Reviews:

No comments

Related manuals for VM-E310A

Brand: Canon Pages: 2

Brand: Canon Pages: 163

Brand: Canon Pages: 8

PICTBRIDGE DC22

Brand: Canon Pages: 3

Brand: Canon Pages: 38

Brand: Canon Pages: 184

Brand: Canon Pages: 20

Brand: Canon Pages: 172

Pixma G1000 series

Brand: Canon Pages: 72

FS200 - Camcorder - 680 KP

Brand: Canon Pages: 2

Brand: Canon Pages: 39

Brand: Canon Pages: 25

EOS C300 Mark II

Brand: Canon Pages: 42

Brand: Canon Pages: 84

Brand: Canon Pages: 116

Brand: Canon Pages: 26

Viera Link HX-WA10

Brand: Panasonic Pages: 3

Brand: Dynex Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands