Number
Item
Description
1
ACT
LED
Green: Normal operation.
Blink green: Drive is being
accessed.
2
ALM
LED
Red: Drive stopped due to
a failure and can be
replaced.
3
POWER
,
READY
,
WARNING
,
and
ALARM
LEDs
Note: When System Option
Mode 1097 is set to ON,
the WARNING LED does not
blink, even if the following
failure service information
messages (SIM) are issued:
452xxx, 462xxx, 3077xx,
4100xx, and 410100.
4
POWER ON/OFF (main
switch)
Powers the storage system.
5
Small form factor drives
The twenty-four 2.5-inch
small form factor drives are
positioned vertically. The
slots are organized from 0
to 23.
CBSS rear panel LEDs
The following table describes the definitions of the CBSS controller rear panel LEDs.
CBSS rear panel LEDs
Chapter 2: Virtual Storage Platform G200 controllers
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
23