manualshive.com logo in svg

Hitachi Universal Storage Platform V, Reference Manual

Share
Download
Hitachi Universal Storage Platform V Reference Manual Download Page 73

 

Functional and Operational Characteristics 

3-29

 

Hitachi Universal Storage Platform V/VM User and Reference Guide 

Mode 

Category 

Function 

Default 

MCU/RCU 

726 

Dynamic 
Provisioning 

Prevents a virtual group from having more than one Dynamic 
Provisioning (DP) volume created at a time. 
Mode 726 = ON: In the window for DP volume creation, a 
virtual group is prevented from having more than one DP 
volume created. Also, the Virtual LVI/LUN operation of the DP 
volume is prevented. 
Mode 726 = OFF (default): A virtual group can have multiple 
DP volumes created (the same operation as before). 

Note: 

When this system option mode is set to ON, only up to 

63,232 DP volumes can be created per storage system. 

OFF – 

727 

ShadowImage, 
ShadowImage for 
z/OS 
FlashCopy v1, v2 
Volume Migration 
COW Snapshot 
Dynamic 
Provisioning 

This option enables to save and recover the local copy control 
information when the power supply is ON and OFF.  
Mode 727 = ON: Control information is sent from SM and 
saved in a system disk when the power supply is OFF.  
If SM is volatilized and recovery of local copy control 
information from the HDD of SVP fails at the time when the 
power supply is on following power off, recovery of the control 
information from a system disk to the SM is implemented.  
Mode 727 = OFF (default): Save and recovery of control 
information using a system disk is not implemented. 

Note: 

1.

 

This option is also turned ON or OFF by switching the 
Additional Configuration Back Up to ON or OFF using the 
System Disk Option of VLL function of Storage Navigator. 

2.

 

This option is applied when the necessity to complement 
the save and recovery using a system disk in addition to 
the save and recovery with a HDD of SVP is required at 
customers’ sites where the Program Products listed in the 
Category column are used. 

3.

 

When this option is applied, as turning the power ON/OFF 
takes longer (up to 15 minutes), review on timeout setting 
of connection system is required. 

4.

 

Make sure to turn this option on after preparing a normal 
system disk that has the available capacity of more than 
7,744 MB (9,082 cylinders for 3390 track format). If Define 
Configuration & Install is performed, turn this option on 
after formatting the system disk. 

OFF – 

Summary of Contents for Universal Storage Platform V







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands