manualshive.com logo in svg

Hitachi Universal Storage Platform V, Reference Manual

Share
Download
Hitachi Universal Storage Platform V Reference Manual Download Page 56

3-12

 

Functional and Operational Characteristics

 

Hitachi Universal Storage Platform V/VM User and Reference Guide 

Mode 

Category 

Function 

Default 

MCU/RCU 

114 

TrueCopy for z/OS 

Turning TCz Links Around option. 

OFF 

MCU/RCU 

122 

ShadowImage for 
z/OS 

Determines whether Quick or Steady, if not specified, is 
performed at the execution of pairresync by CCI.  
Mode 122 = ON: Steady is performed. 
Mode 122 = OFF: Quick is performed. Preventing Mode 87 at 
the pairresync execution by CCI without NormalCopy nor 
QuickResync specified. 

OFF – 

161 

OPEN 

Suppression of high speed micro-program exchange for CHT. 

OFF 

– 

190 

TrueCopy for z/OS 

TCz – Allows you to update the VOLSER and VTOC of the 
R-VOL while the pair is suspended if both mode 20 and 190 
are ON. 

OFF RCU 

269 Common 

High-Speed Format for Virtual LVI/LUN (VLL) (available for all 
device emulation types). 
(1) High-Speed Format support: When redefining all LDEVs in 
an array group using VLL Volume Initialize or Make Volume 
operation, LDEV format, as the last process, will be performed 
in high speed. 
(2) Make Volume feature enhancement: The Make Volume 
operation (recreating new CVs after deleting all volumes in a 
VDEV) is now supported for all device emulation types. 
Mode 269 = ON: The High Speed format is available when 
performing VLL operations on Storage Navigator (or LDEV 
format (SVP Maintenance) for all LDEVs in a array group). 
Mode 269 = OFF: Only the low-speed format is available when 
performing VLL operations on Storage Navigator (and LDEV 
format operations on SVP Maintenance). 

Note: 

If mode 503 is ON, since the format processing is 

prevented, the High Speed Format function for VLL operations 
(mode 269 ON) is not available. For details on the relationship 
between modes 503 and 269, see 

Table 3-2

 and 

Table 3-3

 

below. 

Note: 

Mode 269 is effective only when using the SVP to 

format the CVS. 

OFF MCU/RCU 

278 

OPEN 

Tru64 (Host Mode 07) and OpenVMS (Host Mode 05) 

Caution: 

Host offline: Required 

OFF – 

292 

TrueCopy for z/OS 

Issuing OLS when Switching Port 
When the mainframe host (FICON) is connected with the CNT-
made FC switch (e.g., FC9000) and is using along with the 
TrueCopy for z/OS with Open Fibre connection, the occurrence 
of Link Incident Report for the mainframe host from the FC 
switch will be deterred when switching the CHT port attribute 
(including automatic switching when executing CESTPATH and 
CDELPATH in case of mode 114 = ON). 
Mode 292 = ON: When switching the port attribute, issue the 
OLS (100 ms) first, and then reset the Chip. 
Mode 292 = OFF: When switching the port attribute, reset the 
Chip without issuing the OLS. 

OFF MCU/RCU 

305 Mainframe 

Pre-labeling: Pre-label is added via SVP as tentative volume 
serial name into logical device formatting. 

OFF MCU/RCU 

Summary of Contents for Universal Storage Platform V







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands