manualshive.com logo in svg

Hitachi Universal Storage Platform V, Reference Manual

Share
Download
Hitachi Universal Storage Platform V Reference Manual Download Page 72

3-28

 

Functional and Operational Characteristics

 

Hitachi Universal Storage Platform V/VM User and Reference Guide 

Mode 

Category 

Function 

Default 

MCU/RCU 

714 

TrueCopy Async, 
ShadowImage, 
Volume Migration 
(Mainframe/OPEN)

   

When TCA is coordinated with SI or VM, regardless of CLPR# 
of Quick Restore P-VOL and S-VOL or Volume Migration 
source and target volumes, this option is used to accept an 
operation request of Quick Restore or Volume Migration  
Mode 714 = ON: When TCA is coordinated with SI or VM, an 
operation request of Quick Restore or Volume Migration is 
accepted regardless of CLPR# of Quick Restore P-VOL and 
S-VOL or Volume Migration source and target volumes. 
Mode 714 = OFF (default): When TCA is coordinated with SI 
or VM, an operation request of Quick Restore or Volume 
Migration is rejected if CLPR# differ between Quick Restore P-
VOL and S-VOL, or between Volume Migration source and 
target volumes. 

Note: 

This option is applied when canceling the prevention of 

the request (1) or (2) below.  
(1) A Quick Restore operation is requested when the P-VOL 
and S-VOL of SI that is coordinated with TCA have different 
CLPR#. 
(2) A Volume Migration operation is requested when the 
source and target volumes have different CLPR# with the 
migration source volume also used as TCA volume. 

OFF MCU/RCU 

720 

Universal Volume 
Manager 
(mainframe and 
open) 

Supports the Active Path Load Balancing (APLB) mode. 
Mode 720 = ON: The alternate path of EVA (A/A) is used in 
the APLB mode. 
Mode 720 = OFF (default): The alternate path of EVA (A/A) is 
used in the Single mode. 

Note:

 Though online setting is available, the setting will not 

be enabled until Check Paths is performed for the mapped 
external device. 

OFF – 

721 Common 

When a parity group is uninstalled or installed, the following 
operation is performed according to the setting of mode 721. 
Mode 721 = ON: When a parity group is uninstalled or 
installed, the LED of the drive for uninstallation is not 
illuminated, and the instruction message for removing the 
drive does not appear. Also, the windows other than that of 
parity group, such as DKA or DKU, are unavailable to select. 
Mode 721 = OFF (default): When a parity group is uninstalled 
or installed, the operation is as before: the LED of the drive is 
illuminated, and the drive must be unmounted and 
remounted. 

Note: 

ƒ

 

When the RAID level or emulation type is changed for the 
existing parity group, this option should be applied only if 
the drive mounted position remains the same at the time 
of the parity group uninstallation or installation. 

ƒ

 

After the operation using this option is completed, the 
mode must be set back to OFF; otherwise, the LED of the 
drive to be removed will not be illuminated at subsequent 
parity group uninstalling operations. 

OFF – 

Summary of Contents for Universal Storage Platform V







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands