background image

 

Hitachi Global Storage Technologies 

Page 5 

 

version 1.0 

 

© 2008 Hitachi Global Storage Technologies 

Produced in the United States  11/08 

All rights reserved  

Travelstar is a trademark of Hitachi Global Storage 
Technologies. 

Hitachi Global Storage Technologies’ trademarks are 
authorized for use in countries and jurisdictions in which 
Hitachi  has the right to use, market and advertise the brands. 
The Travelstar trademark is authorized for use in the Americas, 
EMEA and the following Asia-Pacific countries and 
jurisdictions: Australia, Hong Kong, Japan, New Zealand, 
South Korea and Taiwan. Contact Hitachi for further 
information. Hitachi Global Storage Technologies shall not be 
liable to third parties for unauthorized use of Hitachi Global 
Storage Technologies trademarks.   

References in this publication to Hitachi Global Storage 
Technologies’ products, programs, or services do not imply 
that Hitachi intends to make these available in all countries in 
which it operates. Some countries have laws that may affect 
encryption-enabled devices. Hitachi GST assumes no 
responsibility for compliance with laws that apply to our 
products after they are sold or outside of our control. 
Accordingly, we suggest that you review all laws of the 
countries where you conduct business. 

Product specifications provided are sample specifications and 
do not constitute a warranty. Information is true as of the date 
of publication and is subject to change. Actual specifications 
for unique part numbers may vary. Please visit the Support 
section of our website, www.hitachigst.com/support, for 
additional information on product specifications. Photographs 
may show design models.   

12 November 2008

 

Summary of Contents for Travelstar 5K500.B






Reviews: