33
How to Install the Washing Machine
Connecting to the tap
● Water supply hose
n
The optimum water pressure is 0.03 to 0.8 MPa.
Horizontal tap
Extension tap
Water Inlet valve
Water supply hose
n
Connect the water supply hose to the water supply
inlet on the washing machine.
Rubber seal
Hose connector
n
Check that the rubber seal is in the hose
connector.
● Water supply hose with one-touch joint
1. Loosen the top connector.
Top connector
Rubber seal
Fixing screw
Bottom connector
Connector ring
● If the diameter of the tap is larger than
the connector ring, remove the ring.
2. Press up on the top connector so the rubber seal
and the tap are fi rmly sealed. Next, tighten the
4 screws.
Top connector
Rubber seal
Bottom connector
● Rotate the bottom connector so there is no water
leakage.
● Close the tap so you can remove the water supply
hose from the bottom connector. Next, pull off the
hose and lower the clasp.
3. Attach the water supply hose to the bottom connector and lower the clasp.
Bottom connector
Slide bushing
Water supply hose
n
Make sure the union nut between the water supply hose and the washing machine is fi rmly tightened.
n
Before operating the washing machine, open the tap to confi rm that the water supply hose is correctly
connected. If the union nut is loose water will leak.
Summary of Contents for SF-150ZCV
Page 36: ...3WPL124431 ...