Hitachi SF-150ZCV, Instruction Manual

Page: 10 / 36

10
How to Use the Washing Machine
5
Put detergent into the detergent dispenser and close the lid
n
Open the detergent dispenser, add the amount of detergent shown on the package, and then
close the detergent dispenser.
n
The amount of detergent is based on a single 35-gram scoop of powder detergent. Since the
required amount of detergent varies depending on the type of detergent, follow the instructions
on the package of detergent.
n For liquid detergent, follow the instructions on the package and add it to the liquid detergent/
liquid bleach dispenser.
n Add softener to the softener dispenser according to the instructions on the package of softener.
The softener is added to the tub automatically before the fi nal rinse.
n
For liquid bleach, follow the instructions on the package and add it to the liquid detergent/liquid
bleach dispenser.
n
The speed that the lid closes may vary, depending on the temperature, however, this is not
abnormal.
Pausing a program: Press the Start/Pause button. The washing machine will switch
itself off if it is not restarted within 24 hours.
Adding clothes partway
through a program: Press the Start/Pause button to pause operation and add your
clothes. The lid is locked while the tub is spinning, so wait
until the tub stops completely and the lid lock is automatically
released. After adding the clothes, close the lid and press the
Start/Pause button to restart operation.
* Note: It is not recommended to add a large amount of clothes
as the washing machine fi rst measures the load size to
determine optimum operation.
Adding water partway
through a program: Press the Shower Plus button. Adds water when you press the
button. Water stops being added when you press the button
again or the maximum level is reached.
* Note: This function cannot operate in the Tub Dry, Tub Clean,
Easy Refresh, Blanket and Water Save Programs.
Changing strength of water
fl ow: Press the Water Power button.
Repeatedly press the button to adjust the strength through fi ve
levels.
* Note: This function operates in the Normal, ,
Delicate, Speedy, Soak, Stain Care, Allergy Care and Water
Save courses for washing and normal rinsing programs.
Even if the indicator of strength changes, it may not change the
strength according to the process or the load amount.
Terminating a program: Press the Start/Pause button, and press the Power button to
turn off the power.