Hitachi SF-105XE Operating & Installation Instructions Manual Download

Page: 28 / 32

* Water supply hose with one-touch joint

1. Loosen the top connector.

Top connector

Rubber seal

Fixing screw

Bottom connector

●

If the diameter of the tap is larger than the connector ring, remove
the ring.

Connector ring

Connector

2. Press up on the top connector so the rubber seal and the tap

are firmly sealed. Next, tighten the 4 screws.

Rubber seal

Top connector

Bottom connector

●

Rotate the bottom connector so there is no water leakage.

●

Close the tap so you can remove the water supply hose from the
bottom connector. Next, pull o

ﬀ

the hose and lower the clasp.

3. Attach the water supply hose to the bottom connector and

lower the clasp.

Bottom connector

Water supply hose

■

Make sure the union nut between the water supply hose and the
washing machine is

rmly tightened.

■

Before operating the washing machine, open the tap to con

rm that the

water supply hose is correctly connected. If the union nut is loose water
will leak.

How to Install the Washing Machine

Summary of Contents for SF-105XE

































Search results

Summary of Contents for SF-105XE

Reviews:

Related manuals for SF-105XE

Brands by name

Popular brands

Hitachi SF-105XE, Operating & Installation Instructions Manual

Search results

Summary of Contents for SF-105XE

Reviews:

Related manuals for SF-105XE

Brands by name

Popular brands