10
How to Use the Washing Machine
5
Put detergent into the Detergent Dispenser and close the Lid
■
Open the Detergent Dispenser, add the appropriate amount of detergent, and then
close the Detergent Dispenser.
■
The amount of detergent is based on a single 35-gram scoop of powder detergent.
Since the required amount of detergent varies depending on the type of detergent,
follow the instructions on the package of detergent.
■
For liquid detergent, follow the instructions on the package and add it to the Detergent
Dispenser.
■
Add softener to the Softener Dispenser according to the instructions on the package of
softener. The softener is added to the tub automatically before the
fi
nal rinse.
■
For liquid bleach, follow the instructions on the package and add it to the Detergent
Dispenser.
■
The speed that the lid closes may vary, depending on the temperature, however, this is
not abnormal.
■
In the case the position of Detergent Dispenser is hard to use, turn the Tub clockwise
and adjust the position.
* After wash start, Tub is
fi
xed and can not turn.
– Pausing a program:
Press the Start/Pause button. The washing machine will
switch itself o
ff
if it is not restarted within 1 hour.
– Adding clothes partway
through a program:
Press the Start/Pause button to pause operation and
add your clothes. The lid is locked while operating, so
wait until the tub stops completely and the lid lock is
automatically released. After adding the clothes, close
the lid and press the Start/Pause button to restart
operation.
* Note: It is not recommended to add a large amount
of clothes as the washing machine
fi
rst measures the
load size to determine optimum operation.
– Adding water partway
through a program:
Press the Shower Plus button. Adds water when you
press the button. Water stops being added when you
press the button again or the maximum level is reached.
* Note: This function can not operate in the Tub Dry and
Tub Clean Programs.
– Changing strength of
water
fl
ow:
Press the Water Power button.
Repeatedly press the button to adjust the strength
through
fi
ve levels.
* Note: This function operates in the Fuzzy, Powerful,
Delicate, Speedy, Soak, and Water Save courses for
washing and normal rinsing programs.
Even if the indicator of strength changes, it may not
change the strength according to the process or the
load amount.
– Terminating a
program:
Press the Start/Pause button, and press the Power
button to turn o
ff
the power.
Summary of Contents for SF-105XE
Page 31: ...31 Memo ...
Page 32: ...3WPL133451 ...
