Hitachi RAS-3HVRNME-AF, Installation And Operation Manual, Page: 35 / 40

35
PMML0205A rev.4 - 11/2012
ENGLISH
13.2. TesT run ProCedure From indoor uniT side
User could execute the test run function pressing the “OK” and down “ ” arrow button during 3 seconds.
After that combination, the remote control will ask about the duration of this test.
TEST RUN OUTDOOR UNIT
Configuration for outdoor unit test run
Duration:
CANCEL START
INSTALLER MODE
The duration will be between 00:30 and 12:00 hours.
After press start, Outdoor unit will begin with the test run.
During the execution of this test, it will be showed the following screen.
HITACHI
AM
PM
!
TEST RUN OUTDOOR UNIT
44h 20m 19s Pending time: CANCEL
Operation display parameters
System Operation
Unit Status
Actual temperatures
Set-point
€
I II
RUN
T.
III
OFF
SUM
TEST RUN OUTDOOR UNIT
Pending time: 44h 20m 19s
Operation display parameters
System Operation
Unit Status
Actual temperatures
Set-point
On that screen it could be cancelled the test. User could move on same screen through the “Operation display parameters” menu.
Note that when test start it will be exit from the installer mode.
When test run will be set on the outdoor unit, it will appear the test run icon on the notifications row.
When test run will finished it will show the following screen.
HITACHI
AM
PM
!
TEST RUN OUTDOOR UNIT
Test Run Completed EXIT
Operation display parameters
System Operation
Unit Status
Actual temperatures
Set-point
€
I II
RUN
T.
III
OFF
SUM
TEST RUN OUTDOOR UNIT
Test Run Completed
Operation display parameters
System Operation
Unit Status
Actual temperatures
Set-point
Pressing Accept user will go to the global view.
TEST RUN