REMOTE CONTROLLERS OPERATION
9-9
9.1.8.
HOW TO SET SLEEP TIMER
The device will continue working for the designated
number of hours and then turn off.
The timer information will be displayed on the remote
controller. The timer lamp lights with a beep from the indoor
unit. When the sleep timer has been set, the display
indicates the turn off time.
The device can be turn off by the SLEEP timer and turn
on by the ON timer.
NOTE:
1. If date or current time is not set, the SLEEP timer
cannot be set.
2. If the SLEEP timer is set after the ON timer, OFF
timer or the ON/OFF timer, the SLEEP timer
becomes effective instead of the ON, OFF or
ON/OFF timer set earlier.
3. SLEEP timer effective once only.
9.1.9.
HOW TO ADJUST THE AIR DEFLECTOR
The horizontal air deflector is automatically set to the
proper angle suitable for each operation.
The deflector can be swung up and down continuously
and also set to the desired angle using the AUTO SWING
button.
NOTE:
1. If the AUTO SWING button is pressed once, the
horizontal air deflector swings up and down. If the
button is pressed again, the deflector stops in it
current position.
2. When the operation stop, the horizontal air deflector
moves and stops at the position where the air outlet
closes.
CAUTION:
3. In cooling operation , do not keep the horizontal .
9.1.10. HOW TO SET TIME (For RAR-3U1, RAR-3U2,
RAR-3U3, RAR-3U4)
1. Set the current time with the TIMER control button.
2. Press the
¥
(TIME) button again, the time indication
starts lighting instead of flashing.
x
The time indication will disappear automatically in
10 seconds
x
To check the current time setting, press the
¥
(TIME) button twice.
The setting of the current time is now complete.
9.1.11. HOW TO SET TIME (For RAR-2P2)
Whenever or after changing the batteries, the remote
control will prompt for current month and date.
1. Set the current month and day with the TIMER control
button.
2. Press the
¥
(TIME)
button.
3. Set the current time with the TIMER control button.
4. Press the
¥
(TIME) button again, the time indication
starts lighting instead of flashing.
x
The time indication will disappear automatically in
10 seconds
x
To check the current time setting, press the
¥
(TIME) button twice.
The setting of the current time is now complete.
