Hitachi RAC-SX10HYK Instruction Manual Download Page 45 | Manualshive

Page: 45 / 52

Hitachi RAC-SX10HYK Instruction Manual Download Page 45

– 45 –

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

SP

ANISH

POR

TUGUÊS

∂ÏÏËÓÈÎ¿

Р

У

ССКИЙ

•

This is for filter cleaning operation check.

•

If the front panel is not closed properly, filter cleaning operation will not start for
safety reason. (

(CLEAN) indicator lit for 1 second/dim for 1 second)

•

In basic air-conditioner operation (cooling operation etc.), the filter cleaning operation
will not start even when the

(MANUAL CLEAN) button on the remote controller is

pressed. (

(CLEAN) indicator lit for 1 second/off for 1 second, for 10 seconds)

•

During filter cleaning operation or within 5 minutes after the operation, even when
the

(MANUAL CLEAN) button on the remote controller is pressed, the filter

cleaning operation will not restart to protect the device.

(

(CLEAN) indicator lit for 1 second/off for 1 second, for 10 seconds)

•

Is “filter cleaning operation prohibited” being set?

Please return to the filter cleaning operation setting.
(

(CLEAN) indicator lit for second/off for 1 second, for 10 seconds)

•

Are micro mesh stainless filter, dust catcher, filter cleaning wiper, wiper cover correctly
installed?

(

(CLEAN) indicator lit for 4 seconds/off for 1 second)

•

Filter cleaning is not performed if the air conditioner operation is stopped by Sleep
Timer or Off Timer function. However, if the air conditioner is stopped by Sleep
Timer or Off Timer every time, filter cleaning will be performed approximately once
a week.

•

A whirring motor noise is generated due to driving of the cleaning unit.

•

A clapping noise is generated when the dust catcher collects the dust swept by the

cleaning unit.

•

A clapping noise is generated when the dust catcher is turned over by the cleaning

unit.

•

A sweeping sound is generated when the cleaning unit sweeps the dust.

•

Is the front panel open during filter cleaning operation?

•

After the filter cleaning wiper maintenance, is the cleaning unit return to the right
end part using the remote controller?

•

Are micro mesh stainless filter, dust catcher, filter cleaning wiper, wiper cover correctly
installed?

(

(CLEAN) indicator lit for 4 seconds/off for 1 second)

TROUBLESHOOTING

FILTER CLEANING OPERATION

Filter cleaning is
performed after
the power is
turned on (after
the plug-in or after
the circuit breaker
is switched on
after power failure)

Filter cleaning
operation does not
start

(

(CLEAN)

indicator blinks
or lit and dim
repeatedly)

Noise occurred
during filter
cleaning operation

Cleaning unit
stops halfway

«
...
43
44
45
46
47
...
»

Summary of Contents for RAC-SX10HYK





















































Reviews:

No comments