manualshive.com logo in svg

Hitachi RAC-SX10HYK, Instruction Manual, Page: 18 / 52

Share
Download
Hitachi RAC-SX10HYK Instruction Manual Download Page 18

– 18 –

 

Position of horizontal 

air deflector

Wide airflow angle

The angle set for the current 

operation mode

IONIZED MIST OPERATION

• 

Stainless plasma air purifying and ionized mist operations have an effect of reducing unpleasant smell of the 
wall and curtain in the room and controlling bacteria suspended in the air.

• 

If the ionized mist operation is set while the air conditioner is in operation, the ionized mist operation will 
operate together with another operation.

  Ionized mist is generated using the air in the room. It may not be generated depending on the temperature 

and humidity. (It may take approximately 30 minutes to 1 hour for ionized mist generation.)

STAINLESS PLASMA AIR PURIFYING (FAN) OPERATION

• 

Stainless plasma air purifying (Fan) operation is the combined operation mode of the fan operation and the 
electric dust collector operation.

• 

If the stainless plasma air purifying mode is set while the air conditioner is in basic operation mode, the air 
purifying function by the electric dust collector will operate together.

Press the 

 (START/STOP) button.

• 

A short beep sounds and ionized mist operation stops.

• 

Adjust the fan speed to your preference. “HI”, “MED”, “LOW”, “SILENT” can be 
selected. (Page 14)

• 

When only ionized mist operation is set, 

 (OFF TIMER) and 

 (ON TIMER) 

preset cannot be done.

Press the 

 (IONIZED MIST) button.

Press the 

 (IONIZED MIST) button.

Press the 

 (START/STOP) button.

• 

A short beep sounds and stainless plasma air purifying operation 
stops.

Press the 

 (AIR PURIFYING) button.

Press the 

 (AIR PURIFYING) button.

• 

Adjust the fan speed to your preference. “HI”, “MED”, “LOW”, “SILENT” can 
be selected. (Page 14)

• 

When only stainless plasma air purifying operation is set, 

 (OFF TIMER) 

and 

 (ON TIMER) preset cannot be done.

STOP

STOP

CANCEL

during

operation

CANCEL

during

operation

Operation mode

Ionized mist operation only

When operate together with 

another operation

Summary of Contents for RAC-SX10HYK





















































Reviews:

No comments