Hitachi RAC-18SX8 Instruction Manual Download Page 13

Page: 13 / 52

– 13 –

ENGLISH

DEUTSCH

FRANÇAIS

ALIANO

ANISH

POR

TUGUÊS

∂ÏÏËÓÈÎ¿

ССКИЙ

•

Performs heating operation when the room temperature is below 23°C.

Set the temperature to be around 23°C.

•

Performs dehumidifying operation when the room temperature is 23~26°C.

The preset temperature will be the room temperature at the time of start of air conditioner

operation.

•

Performs cooling operation when the room temperature is above 27°C.

Set the temperature to be around 27°C.

RAR-3R5

AUTOMATIC OPERATION

Press the

(OPERATION SELECTOR) button

to set the operation mode to Auto.

•

Every time you press it, the mode will change as
shown in the chart on the right.

Press the

(START/STOP) button.

Based on the room temperature and outside temperature, the unit determines the most suitable operation
mode (heating, dehumidifying or cooling) and a comfortable temperature. (Set the current time on the remote
controller before starting operation.)

Press the

(START/STOP) button again.

•

A short beep sounds and the automatic
operation stops.

•

Operation mode will be displayed on the
remote controller display.

Adjust the room temperature

Press the

(ROOM TEMPERATURE)

button.

•

Every time you press it, a short beep sounds and the
temperature will change by 1°C.

•

is displayed if the temperature is set higher than

the automatically set room temperature by 1°C.

is displayed if the temperature is set lower than the

automatically set room temperature by 1°C.

•

The adjustable temperature range is not higher or lower
than 3°C of the automatically set room temperature.

•

Humidity setting cannot be adjusted.

Increase

Decrease

Beep

Room temperature and fan speed can be adjusted to your preference.

Select the fan speed

Press the

(FAN SPEED) button.

•

“AUTO”, “LOW” and “SILENT”
can be selected.

•

Every time you press it, the
mode will change as shown in
the chart on the right.

STOP

AUTOMATIC OPERATION

Heating

Dehumidifying

Cooling

Even if dehumidifying operation is set, the air conditioner may not execute dehumidifying if the room humidity

is not very high. This is not a malfunction.

Summary of Contents for RAC-18SX8





















































Search results

Summary of Contents for RAC-18SX8

Reviews:

Brands by name

Popular brands

Hitachi RAC-18SX8, Instruction Manual

Search results

Summary of Contents for RAC-18SX8

Reviews:

Brands by name

Popular brands