– 20 –
ATTACHING THE AIR CLEANSING AND DEODORIZING FILTERS
1
Open the front panel.
●
Pull up the front panel by holding it at both sides
with both hands.
2
Remove the
fi
lter.
●
Push upward to release the claws and pull out the
fi
lter.
3
Attaching the air cleansing and deodorizing
fi
lters
to the
fi
lter.
●
Attach the air cleansing and deodorizing
fi
lters to
the frame by gently compress its both sides and
release after insertion into
fi
lter frame.
4
Attach the
fi
lters.
●
Attach the
fi
lters by ensuring that the surface written
“FRONT” is facing front.
●
After attaching the
fi
lters, push the front panel at
three arrow portion as shown in
fi
gure and close it.
Cleaning and maintenance must be carried out only by quali
fi
ed service personal. Before cleaning,
stop operation and switch off the power supply.
CAUTION
!
!
CAUTION
Do not bend the air cleansing
and deodorizing
fi
lter as it may
cause damage to the structure.
NOTE
●
In case of removing the air cleansing and deodorizing
fi
lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air
cleansing and deodorizing
fi
lters are used. So, set the fan speed to "HIGH" when using it in this
condition.
●
Air cleansing and deodorizing
fi
lters are washable and reusable up to 20 times by using vacuum
cleaner or water rinse under running tap water. Type number for this air cleansing filter is
<SPX-CFH5>. Please use this number for ordering when you want to renew it.
●
Do not operate the air conditioner without
fi
lter. Dust may enter the air conditioner and fault may
occur.
Claws
(4 places)
RAS-18KH(T1)-24GH4 (2).indd 20
RAS-18KH(T1)-24GH4 (2).indd 20
5/12/10 10:22 AM
5/12/10 10:22 AM
