Ğᙷᛉğ
(Continue)
51
W
he
n i
n t
ro
ub
le
വΡੰᖠढ
ढ
!Ğ
ᙷ
ᛉ
ğ
W
ha
t T
o D
o I
n T
he
se
S
itu
ati
on
s
(C
on
tin
ue
)
Ӕଖ᛫݊ሂჯڟձ
૰ഁ͟ࢨϰ
ΰٷ
ےΰވᄫڣ
Ф͟ސࡵܢ֗ʟ!
ყϕᇺؖᏽϕුᐮഁଜĄ
ਰ۫
3
Щ
ਰ۫
1
Щ
ቜઠጿγВყϕ଼݉ڪĂ
ဂފ
Ķყϕᇺ଼ᇓķ
Ą
ĶყϕᎵጅķ!ΰጷਰᗗढĂސϵҙڣӨ࢈ьყϕጠăຣݙૡყă!
ؖސਸ਼ᓷཆ༊͎୪ʟ୴લĄቜַૌؚᓊඵڟ༄ኛ੦߁Ą
Ⴤ༄ኛ੦߁܉Ăቜϑሂჯʮےڟ˱࣠ĄЃَΰ॑Ͷ܌ےΰΓલĄ
˚྆࿋ʮےཇڟΰٷĂФढዑ႓ԠФވᄫʶΰĄ
The "Large ice cube making" lamp will flash to alert you if the automatic ice
maker, temperature regulator, or the defrosting mechanism etc, is not
operating properly. Please consult with the retailer from which you
purchased the refrigerator.
Please check the following before consulting the retail store. If the light
stops flashing, everything is normal.
However, if it is flashing in any of the patterns in the table below, it may not
be a malfunction.
This is to alert some malfunction
Flash pattern
3 flashes
1 flash
Possible cause
What to check
Food or something may
be touching the ice
making tray or the ice
quantity check lever.
This can be seen
immediately after the
power is turned on or
when the stop ice
making button is pressed
while ice making
operation is performed.
After a certain period of
time (approximately 20
seconds) has elapsed, a
long beep sounds and
flashing stops.
Please empty the
separate ice compartment
and carry out "ice tray
cleaning."
)!
Pg. 30,38
*
)!
Pg. 32,39
*
)!
30,38
ࡲ*
)!
32,39
ࡲ*
ϵࢤನʣྫປؖყϕ྆!
ു˛ݸʮყϕ̥ᓤĄ
ി์Ğ࠘
20
ࠌğݟʙ!
ʮĂń.ŅᒐᛪਔĂ!
ਰጷ̥Ą
Ѓَ֗ڪڑဘཌਸ਼ढڟᅣᅣᒐĂ܌ڪ݉ΓલĄ
ņڪ
ǩȓDZ
Ňڟݾΰጷ۫ฝĉ
ԠФʮӰ̙ฝĉ
ڪઝؖڪཌਸ਼̌Ğᕢѓğސ˚ސ૬ʟؖڱᖬʟĉ
ڪ݉ΈƟᘰఖݣ͟ԠФᅣᅣᒐĂސϰߏڪ߅ЪढΓػזོᕽڟݟּڑဘĂ
ф˚ސވᄫĄ
ސҏࡵܢ͓ཆ͚ўʟؖڱдܱٮϵڪઝʰʟĉ
ϕሑ˱ጇѰٖ
ʰڟĶყϕᎵ
ጅķΰጷਰᗗ
˚ሂסސҏӜ
Йڪڑဘ
ЃَΈڪ݉
ढԠФ֗ᅣᅣ
ᒐ
ڪ݉ސҏΓલڑဘĉ
The "Large ice
cube making"
lamp on the
internal control
panel is flashing
Not sure if the
vacuum state is
formed
There is no
hissing sound
when opened the
compartment
Something is wrong with the vacuum compartment?
It is normal if a hissing sound of vacuum release is heard.
Is the “Vacuum” indicator light ON?
Is the handle not pulled down?
Did the vacuum packing or vacuum release valve (blue) located below the handle come off or
are they loose?
There may not be a hissing sound immediately after the vacuum compartment is
opened/closed because the vacuum pump is in the stand-by state for starting operation at this
time. This is not a failure.
Is any food package, etc. stuck or dirt is deposited on the vacuum packing?
R-SF60YMJ (D).indd 51
3/25/09 9:57:52 AM