64
VARIOUS FUNCTIONS
(CONTINUED)
Set the condensation prevention heater to MIN.
(Swing partition)
Setting the condensation prevention heater to MIN saves energy.
When dew is formed in the swing partition, set it to the standard.
The temperature settings for the swing partition can be adjusted by three levels (1 to 2), and level 2 is the most energy
saving.
Setting the swing partition
Open the door of the Lower Freezer Compartment.
Touch
button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Close the door of the Lower Freezer Compartment.
Press down
button for 3 seconds or more until the preset sound is heard.
The setting of MIN level of the dew condensation prevention heater will be switched on.
Repeat the above-stated operation to set it to the level you prefer (see the table above).
1
2
4
3
Swing partition
●
The setting will be returned to the standard when the power plug is disconnected and connected or power failure recovery takes place.
Notice
MIN setting of the heater
Standard
MIN setting
level 1
MIN setting
level 2
Standard
Preset sound
−
Long beep
Long beep (2 beeps)
2 beeps
(Factory setting)
Summary of Contents for R-G620GA
Page 40: ...40 MEMO ...
Page 78: ...78 MEMO ...
