56
ICE COMPARTMENT
(AUTOMATIC ICE MAKER)
Ice Compartment
Control Panel
Water Supply
Container
(Approx. 1.0 L)
Ice Making buttons
AUTOMATIC ICE MAKER
Ice Case
Display
Ice
Making
button
“Water Supply” indicator lamp
Ice Compartment
How to make Ice
Touch
button on the Control
Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are
displayed.
Touch
button to turn
on “On” indicator lamp.
The “On” mode is set to “On” (light on)
before shipping.
1
2
It may take longer time to make ice in the following cases:
・
It is used for the first time (it may take 24 hours or more).
・
It is set to the “Energy Saving” mode.
・
The door is opened/closed frequently.
・
Large volume of foods is stored in the refrigerator at a time.
・
In case of power outage.
・
With the low ambient temperature in winter, etc.
・
After the ice tray is cleaned.
・
When the door of the Freezer Compartment / Ice Compartment is
not closed completely.
・
When the temperature of the Freezer Compartment is set to “
■
”.
・
When something hot is stored in the Small Article Case (for only R-X730G type).
Notice
Touch it
Ice scoop
Container-full line
Container-
full line
Ice Storage Space
Small Article
Case
Replace the Water
Supply Container.
Push it straight beyond the “Container
set position” line completely.
Water will not be supplied until the water supply container is
pushed to the end.
※
Water may spill out if the water supply container is
inclined. Wipe off spilled water immediately.
Ice-Making starts automatically.
●
Ice cubes are stored in the Ice Case.
●
12 pieces of ice cubes are made by one ice-making operation.
●
When ice cubes reach the Container-full line, the
automatic ice-making function is suspended. The function
automatically resumes when ice gets low.
●
When the Ice Case contains no ice cube, you may hear a
large sound when ice cubes fall from the Ice Tray.
Open the lid and add water.
Water level can not exceed “Container-full line”.
※
Do not pour water into it beyond
the full water line.
Lid
Container-full line
Container set position
5
6
4
Perform “Ice Maker Cleaning” when making ice for the first time or for the first time in a week or more.
Pg.68
Add water line
Take off the Water Supply Container.
When the “Water” indicator lamp is
lit or the water level reaches to the
“Add water line”, replenish water.
3
Ice Tray
R-X730G type
Add water line
Tea
JUICE
MINERAL
WATER
●
Do not use the following ones because they may cause malfunction,
deformation or sticking ice.
Mineral water
(Hardness: 100mg/L or less)
Juice drink
Sports drink
Carbonated drink
Tea
Filtered water or
boiled water
Well water
(Required to satisfy the appropriate
water quality standard)
Request
19
●
WARNING: fill with potable water only.
●
Water for ice making is according to your drinking standard. Quality
of tap water may vary in different countries. Please check and verify
with your local authority.
●
Change water and clean the container at least once a week for
hygiene purposes.
Pg.69
●
If the ice made of mineral water containing a lot of mineral
ingredients is put into water, white powder may come out,
however this is due to those mineral ingredients and harmless.
●
Furthermore, these types of water are easily contaminated with bacteria.
Please wash the container usually once 3 days.
R-X670G type
R-G670G type
R-G620G type
Summary of Contents for R-G620GA
Page 40: ...40 MEMO ...
Page 78: ...78 MEMO ...
