D A N G E R
7XUQ2))WKHPDLQSRZHUVZLWFKIRUWKHLQGRRUXQLWVRXWGRRUXQLWVDQGFHQWUDOVWDWLRQVEHIRUHWKHHOHFWULFDOZLULQJZRUNLVSHUIRUPHG
,IQRWLWPD\FDXVHD¿UHHOHFWULFDOVKRFNRUGHYLFHEUHDNLQJGRZQ
'RQRWXVHFDEOHVWKDWDUHOLJKWHUWKDQWKHQRUPDOÀH[LEOHFRDWHGSRO\FKORURSUHQHFD51)
Switch setting procedure
The list for switch settings of central stations is shown in the following table.
1
Apply switch settings as appropriate.
6ZLWFK
6ZLWFK
QXPEHU
8VDJH
)DFWRU\
6HWWLQJ
Remarks
RSW1
(16-pole Rotary Switch)
-
For address setting of central station
0
When using multiple central stations units. (*)
DSW1
(4-pole DIP switch)
1
ON: Setting for no H-LINK II support
OFF: Setting for H-LINK II support
OFF
Refer to the chart in the next page.
2
OFF (Fixed)
OFF
Not used
3
OFF (Fixed)
OFF
Not used
4
OFF (Fixed)
OFF
Not used
DSW2
(2-pole DIP switch)
1
ON: Terminating resistance enabled
OFF: Terminating resistance disabled
OFF
Make sure that no other terminating
resistance exists on the same H-LINK when
enabling the terminating resistance from the
central station.
2
ON: Protection fuse for H-LINK...Disabled (Short-
circuited)
OFF: Protection fuse for H-LINK...Enabled
(Normal)
OFF
SW1
ON: Turn the central station ON
OFF: Turn the central station OFF
ON
N O T E
7XUQ2))WKHSRZHUVXSSO\ZKHQVHWWLQJWKH',3VZLWFKHVDQGWKHURWDU\VZLWFK'RQRWWRXFKWKHSULQWHGFLUFXLWERDUGDQGPHWDOSDUWVGLUHFWO\WR
DYRLGPDOIXQFWLRQRIWKHFHQWUDOVWDWLRQ
:KHQVZLWFKLQJWKHVHW/,1.,,VXSSRUWSHUIRUPDFKHFNLQJSURFHGXUHIROORZLQJ
³&KHFNLQJ&RQQHFWLRQ´
,I'6:LVPLVFRQ¿JXUHGDODUP&HQWUDO'HYLFH&RPELQDWLRQ)DXOWZLOOEHHPLWWHGIURPDFHQWUDOFRQWUROGHY/,1.VXSSRUW,QWKLV
FDVHWXUQ2))WKHSRZHUVXSSO\IRUDOOFHQWUDOFRQWUROGHYLFHVDQGFRUUHFWWKHVHWWLQJVRIHDFKFHQWUDOFRQWUROGHYLFH7KHQUHVWDUWWKHFHQWUDO
FRQWUROGHYLFHV
:KHQXVLQJVHYHUDOFHQWUDOVWDWLRQVDWWKHVDPHWLPHVHWWKHYDOXHVRIHDFK³56:´QRWWRRYHUODS
ENGLISH
Electrical wiring
PMML0332A rev.0 - 05/2015
9
Summary of Contents for PSC-A32MN
Page 2: ......
