1. Before Installation and Operation
Set the batteries (AAA/1.5V
5
2) for the controller as
follows.
(1) Remove the battery cover by sliding toward the
arrow direction by pushing the part of the cover as
shown in the right figure.
(2) Set the batteries. (Insert the batteries according
to the marks of + and - on the case.)
2. Setting Batteries
This packing contains the following parts. Check the contents and the number of the parts.
Name
Q’ty
Remark
Wireless Remote Control Switch
(Controller)
1
For Operation Control
Holding Bracket
1
For Controller
Battery (AAA/ 1.5V Dry Cell)
2
For Power Source of Controller
Screw
2
For Fixing “Holding Bracket” onto Wall
Slide the cover in
the arrow direction
with pushing.
AAA Batteries
2
● Do not turn ON the power source, unless the preparation for test running is completed.
● Read this manual carefully before installation work for correct performance.
● Read this manual together with the “Installation & Maintenance Manual” of the indoor unit.
