10
/
20
2.3 Connect the USB cable
Connect the USB Micro-B plug of the USB cable to the USB Micro-B connector of the
Biometric Reader.
Connect the plug A of the USB cable to the USB port of your PC.
Attention
Connect the USB plug and the USB connector securely. Hold the plug end when
connecting or disconnecting the USB cable to prevent the connectors from
damage.
Important
When connecting the USB cable via a USB hub, check the supply current. The
Biometric Reader may malfunction with insufficient power supply.
Do not use a USB 1.1 hub for a USB 2.0 PC port, which may cause the Biometric
Reader to malfunction.
Biometric Reader may generate some heat due to the use of infra-red light inside,
but this will not cause any malfunctions.
Do not connect more than one Biometric Reader simultaneously to one PC. If
multiple Biometric Readers are connected, they will not work properly.
After connecting the Biometric Reader to your PC, wait for at least 5 seconds
before performing any operation. In some PCs it may take more than 5 seconds
until the Biometric Reader becomes ready for use.
Biometric Reader
USB Micro-B connector
USB Micro-B plug
USB cable
