6
OPTIONAL FUNCTIONS
D A N G E R
Turn OFF the power source completely before performing
the dip switch setting for receiver kit. If not, it may cause an
electric shock.
The following switches are on the receiver kit.
N O T E
When the case is closed, pay attention to the outlet position for
connecting cable.
3 4
1 2
5 6
ON
RUN
DEF
FILTER
TIMER
COOL
HEAT
EMERGENCY
PCB
Dip switch (DSW1)
(Factory-setting)
Switch “COOL”
Cover
Outlet for
connecting cable
Case
Fixing braket
Switch “HEAT”
(1) Remove the fixing bracket.
(2) Remove 2 fixing screws to
open the case.
The dip switch (DSW1) is for the optional function selection. If the optional function selection is required, set the dip switch as follows.
Optional function
Dip switch setting (DSW1)
Details
1
2
3
4
5
6
Main/sub setting
O
X
X
X
X
X
Change main (OFF setting)/ sub (ON setting) remo
-
te control switches for 2 remote control system.
Identifying of indoor unit
X
O
X
X
X
X
It functions as B Mode (identifying of indoor unit) of
wireless remote control switch when it sets to “ON”.
Invalidity of emergency operation
X
X
X
O
X
X
The switches for emergency operation are invalid.
N O T E
Pay attention to the following optional function settings when the function for receiver kit is selected from the remote control switch or
the centralized controller.
•
The optional functions “Cooling lower limit for setting temperature” and “Heating upper limit for setting temperature” are not avai
-
lable. The setting is available beyond the upper and lower limit for setting temperature from the wireless remote control switch
(PC-ARF).
•
The optional function setting “Fixing of setting temperature” is not available. When the operation mode is changed from the wire
-
less remote control switch, the indicated temperature on the wireless remote control switch becomes set temperature of the wired
remote control switch.
8
DIP SWITCH SETTING ON INDOOR UNIT SIDE
The details of dip switch setting on indoor unit side should be refered to “Installation and operation manual” of indoor unit.
7
ELECTRICAL WIRING
The details of wiring connection method should be refered to “Installation and operation manual” of indoor unit.
10
PMML0264A rev.1 - 09/2015 - P5416575
Optional functions